Phương pháp lắp đặt chung của màng chống thấm composite vải địa kỹ thuật
As the key medium of the anti-seepage structure, the geomembrane layer should meet the stress requirements during installation, because the leak control effect of geomembrane is related to its strength and thickness. Therefore, choose the appropriate thickness according to the design stress.
The màng chống thấm composite vải địa kỹ thuật heated with geotextile on one side or two sides has the features of high overall strength, tear resistance, anti-breaking and anti-piercing ability. The geotextile compounded on the membrane surface has supported and protected abilities.
For the leak control structure utilized with composite geomembrane, in general, the support layer and the protection layer can be simplified. For example, this geotextile composite geomembrane can be directly laid before the placement of concrete facing surface or the protective surface composed of the gravel cushion and the concrete slab. After laying this composite geomembrane, the medium coarse sand cushion can be directly laid.
The phenomenon that geotextile composite geomembrane is punctured is caused by the unenven subgrade, so it is important to prepare and maintain the civil works of subgrade.
General geotextile composite màng chống thấm installation method:
Đầu tiên, điều trị dưới cấp
Subgrade should be prepared according to the design requirements, which is the key to ensuring the leak control performance. The substances including sharp stones, roots and other foreign subjects should be thoroughly removed, and subgrade is not allowed to be uneven. The prepared and maitained subgrade should be compacted by a tamper or a seesaw.
Thứ hai, đẻ
Khi đặt màng chống thấm composite vải địa kỹ thuật, nó phải được đặt từ trên xuống dưới. Sự chồng chéo giữa geocomposite, và giữa geomembrane và subgrade phải phẳng và chặt, nhưng không nên kéo quá chặt, nói chung nó nên hơi lỏng lẻo. Các bong bóng nên được ngăn chặn từ phía dưới. Do màng chống thấm composite vải địa kỹ thuật tương đối mỏng và nhẹ nên rất dễ bị gió thổi trước khi đặt lớp bảo vệ. Do đó, không nên triển khai màng chống thấm composite vải địa kỹ thuật với diện tích lớn cùng một lúc. Đặt lớp đất bảo vệ một khi geocomposite được đặt tốt.
Thứ ba, khớp
The joint has three methods of hot-melt welding, gluing and compacting, wherein the hot-melt welding has the best waterproof effect.
Thượng Hải Yingfan Môi Trường Kỹ Thuật Co., Ltd.